Zip™ 8 Soild Fuel Cubes
||‘Just light the wrapper’|
||Burns for up to 18 minutes|
||Odourless & Food Safe - won’t taint food|
||Safe for wildlife|
||Quick, powerful & easy to light in all weather conditions|
||Made from non-toxic natural biofuel|
||Clean burn – no soot|
||For use with Zip Outdoor Cooking Systems|
Preparation and Usage
- Assemble and set up stove in accordance with stove manufacturer’s instructions. Position the fuel cube (in its wrapper) centrally in the bottom of the stove with the seam facing upwards. For more heat, add additional cubes as required, but do not overfill. If wet, shake thoroughly to remove any excess water prior to placing in position.
- Light the wrapper by inserting a match through the pilot hole.
- Allow approximately 30 to 60 seconds for the fuel wrapper to achieve all over burn.
- Place liquid and food sachet in your cup, pot or pan. Carefully place on the cooking platform and allow the water to heat the food.
Care and safety
IMPORTANT: Ensure adequate ventilation if stove and fuel are used indoors. Do not remove the wrapper from the fuel cube, simply light the wrapper.
Always take care with open flames and hot liquids.
- Keep away from children and pets.
- Do not light fuel in your hand. Always light the fuel when placed in cooker.
- If unintentional skin contact occurs, wash area thoroughly with soap and water.
- If unintentional eye contact occurs, wash eye with water for several minutes.
- If irritation persists, seek medical attention.
- During cooker use, the cup, pot or pan must always be placed on top of the cooker.
- Do not overfill your cup, pot or pan with liquid or food.
- Do not allow contents of cup, pot or pan to boil dry.
- After use, allow the flame to extinguish (either naturally or by smothering).
- Ensure the cooker and cup, pot or pan are cool before cleaning and storage.
California Proposition 65 Warning. WARNING – Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Burning fireplace or wood stove fuels: natural firewood, natural gas, and manufactured fireplace logs, results in the emissions of carbon monoxide, soot and other combustion by-products which are known by the State of California to cause cancer, birth defects or reproductive harm. Many factors affect the operation of your fireplace. A properly installed and maintained fireplace and chimney will dramatically reduce the likelihood of combustion products entering your home. An inadequate air supply could cause a fireplace malfunction. If you suspect that your unit is not functioning properly, a qualified contractor should be contacted.